Yamaha - Customer Bikes

All our Yamaha owning customers showing off their custom parts from Omega Racer. 

YAMAHA SR500 BY EXESOR MOTORCYCLES

Christian Schwarzenlander contacted us April 2013 inquiring about Omega Racer supplying him with a custom fairing for an upcoming build. It was interesting for us as it was the first time somebody had asked for a fairing without a headlight cutout. After a few emails back and forth, the idea was set in motion.

He eventually went on to order an aluminium tank and a set of engine cooling fins with the fairing and we set to work.  

Yamaha SR by Stu Lloyd

Stu just finished building his SR and sent us a couple of pictures of his masterpiece. There is a LOT of work involved here and we absolutely love it!
For this project we supplied the fairing supporting brackets (Stu already had the fairing) and the Full Scrambler Exhaust System (Type 2). This is the definite proof that a scrambler pipe can look great on a racer too!

SR400 by Warwick Alderton

Here's the finished SR project, brainchild of Warwick in New Zealand. He used one of our Tracker seats to complement the very clean rear end of his SR. Of course, it get's Omega's approval stamp. ;-)

SR400 by Bradley Paul

Bradley is one of our returning customers. He built this gorgeous SR with our Navigator tank, Solor Racer seat and a few other bits and pieces.

SR400 by Simon Belcher

Simon asked us for a custom seat for his SR400. We obliged and supplied this seat. He loves it. We are happy. Life is good.

XS650 by Chris Greaves

Chris mounted our Triumph Aluminium Fairing on his Yamaha XS and we think it looks perfect! He also used SR400 speedo and tacho assembly, SR steering damper knob and modified a Triumph tank strap. The result is stunning.

SR400 by Daniel Hadorn

Just got this message from Daniel:

Location: Switzerland

Bike: Yamaha SR400

Owner: Daniel Hadorn

Project: In progress ( to be continued...)

 

Frontfender & Seat by Omega Racer. Thanks, this is great stuff!

Precise, short, to the point...Swiss efficiency :-)))

 

SR500 by Tim Dawe

Tim says it's still a work in progress, but we think it looks great already. Tim mounted our Mojave Scrambler aluminium tank and side covers. Good job Tim!

TT500 by Paul Miller

Paul's TT500 is so gorgeous it got featured on BikeEXIF. We're very happy for him and are proud to have contributed a little to his success by supplying him with our aluminium "Sport" tank.

Yamaha SR400 by Carlos Rodriguez

Our Scrambler FI fitted on Carlos' SR400. Perfect fit!

SR500 by Bob Smith

Bob just sent us these pictures of his SR with the new seat and Supertrapp Style muffler.
He also left a nice feedback for us:
Ordered Supertrapp style muffler and Café rocker V2 seat,
Questions were answered quickly and courteously. Ordering was easy, Postage was prompt and Items received within 14 days as expected. Goods were exactly as described and fitted well. Quality was good, Would certainly deal with this supplier again.
Thanks.
Bob

SR400FI by Erin Overcash

Erin used a number of Omega parts, including the tracker seat and the full scrambler exhaust system, resulting in this well balanced SR.

Yamaha SR500 by Guillaume and Ben Barras

From Hong Kong comes this Yamaha SR500, built by the brothers Guillaume and Ben Barras. For their build they've chosen one of our Norton aluminium tanks. Their creation even made it on BikeEXIF !

Yamaha SR500 by Yannick Cornaz

Yannick is from Switzerland and he did a great job on his SR. He mounted our Misano tank and the big aluminium fairing. A perfect combination!

Yamaha SR500 by Rob Lovelace

Rob just sent us this picture of his SR500 that he just fiished. The Mojave tank, seat cawl and fenders come from Omega Racer, but creativity and hard work are all his doing. Great job Rob!

Yamaha SR500 by Joachim Seidler

Joachim's very shiny cafe racer is right up my alley. In fact, it reminds me of my own SR500 "Telos". For his project Joachim got the tank and seat cowl combo from us, as well as both fenders and the top yoke. Outstanding bike!

1978 Yamaha SR500 by Edwin Esparra

This stunning SR500 was Edwin's first attempt at a bike restoration. And what a job he did! The tank, fairing and many other bits and pieces come from Omega Racer, but it was his passion and skills to fit everything together with such a great result. We love it!

Edwin: "Thanks Markus for the fairing, tank, advise and all the other bits to make it possible!"

Yamaha SR400 by Arden Fiegert

Arden build this very unique SR in Australia, using a few Omega Racer parts in the process (engine undercowl, valve covers etc). Not your usual cafe build, and that's why we like it so much. 

David Powell's SR Project

David Powell sent us some pictures of his completed Yamaha SR project, a very neat bobber/scrambler/brat. Whatever you want to call it, one thing is sure: it's finger-licking good!

On this bike, David used a pair of small aluminium side covers and modified them to accomodate the relocated ignition key.

Gian Luigi's Sport SR

For his project Gian Luigi from Italy used the Omega Racer SPORT aluminium tank, the aluminium side covers, a front fender, an exhaust pipe and the unique "The Sports" seat cowl, all provided by us. One of his friends made a pair of fiberglass 'skirts' to fit on the underside of the tank, so that its lines would converge with those of the seat cowl, an awesome job he did, too!